Solution Finder Get Tech Support

IoT, Smart Home and Building Automation

Billions of line-powered "smart things" with embedded intelligence, such as sensors, actuators, and connectivity, will support the rapid growth of IoT in the near future. The significant impact on worldwide energy consumption from these "always-connected" products has driven the need for compact, highly efficient offline power converters with ultra-low standby power consumption.

Power Integrations offers a broad range of integrated high-voltage ICs to power Smart Home and Building Automation devices most efficiently from the AC mains. These ICs integrate power MOSFETs and control and protection circuitry on a single chip; this enables customers to design low component count solutions with fast time to market. Some key benefits are dramatic reduction in standby energy waste by EcoSmart™ technology, elimination of typical opto-couplers with an innovative FluxLink™ technology for feedback across an isolation barrier, reduced EMI with frequency jitter, fault protection, and improved reliability with built-in thermal shutdown.

Power Integrations is a member of Wireless Power Consortium, an open, collaborative standards development group of more than 500 member companies collaborating on worldwide compatibility of all wireless chargers and wireless power sources. WPC’s member companies are large and small competitors and ecosystem partners representing brands from all parts of the industry and all parts of the globe.

 

Reference Designs

Additional Documents
Design
Product
DER-1024 - 65 W USB PD 3.0 Type-C Shared-Capacity Dual-Port Wall Outlet Using InnoSwitch3-Pro PowiGaN
Product InnoSwitch3-Pro
DER-979 - 100 W In-Wall USB Outlet with Selectable Output Voltage Using InnoSwitch4-CZ PowiGaN and ClampZero
Product InnoSwitch4-CZ, ClampZero
DER-971 - 0.25 W Non-Isolated Power Supply Without Electrolytic Capacitors Using LinkSwitch-TNZ
Product LinkSwitch-TNZ
DER-958 - 70 W High-Line Input Voltage Power Supply for Wall Outlets with USB Type-C/A Ports Using InnoSwitch4-CZ PowiGaN and ClampZero
Product InnoSwitch4-CZ, ClampZero
DER-867 - 2-Wire BLE Smart Wall Switch using LinkSwitch-TNZ with Relay Zero-Voltage Switching and Automatic Set/Reset Time Calibration
Product LinkSwitch-TNZ
DER-949 - 70 W Power Supply for Wall Outlets with USB Type-C/A Ports Using InnoSwitch4-CZ PowiGaN and ClampZero
Product InnoSwitch4-CZ, ClampZero
DER-865 - 2-Wire Forward/Reverse Phase BLE Smart Dimmer using LinkSwitch-TNZ with Lossless AC Zero-Crossing Detection
Product LinkSwitch-TNZ
RDR-866 - 2.5 W Non-Isolated Power Supply with Lossless Generation of AC Zero-Crossing Signal using LinkSwitch-TNZ
Product LinkSwitch-TNZ
RDR-877 - 6 W Isolated Flyback Power Supply with Lossless Generation of AC Zero Crossing Signal using LinkSwitch-TNZ
Product LinkSwitch-TNZ
DER-879 - 10 W Isolated Flyback Power Supply with Lossless Generation of AC Zero Crossing Signal and X Capacitor Discharge using LinkSwitch-TNZ
Product LinkSwitch-TNZ
RDR-874 - 0.48 W Non-Isolated Power Supply with Lossless Generation of AC Zero-Crossing Signal using LinkSwitch-TNZ
Product LinkSwitch-TNZ
DER-880 - 2 W Non-Isolated Flyback Power Supply for Home and Building Automation Using LinkSwitch-3
Product LinkSwitch-3
RDR-721 - 2.75 W Non-Isolated Buck Converter for Home Automation Using LinkSwitch-TN2
Product LinkSwitch-TN2
DER-917 - 60 W Power Supply for Wall Outlets with USB Type-C/A Ports Using InnoSwitch3-CP with PowiGaN Technology
Product InnoSwitch3-CP
DER-849 - 30 W 18 V Output Isolated Flyback Power Supply for Smart Speakers Using InnoSwitch3-CP
Product InnoSwitch3-CP
DER-748 - 45 W Selectable Output Voltage USB Power Supply Using InnoSwitch3-CP with PowiGaN Technology (INN3279C-H222)
Product InnoSwitch3-CP
RDR-848 - 42 W Dual Port Isolated Flyback Power Supply with 30 W USB PD 3.0 and 12 W USB-A Port Using InnoSwitch3-Pro with PowiGaN Technology (INN3379C-H302)
Product InnoSwitch3-Pro
DER-832 - Two-Wire (No Neutral), Wide-Range, Isolated Flyback, Bluetooth Wall Switch using LinkSwitch-TN2 and Nordic BLE Micro-Controller
Product LinkSwitch-TN2
DER-815 - 45 W 24 V Output Isolated Flyback Power Supply for Smart Speakers and Tubular Motors Using InnoSwitch3-CP
Product InnoSwitch3-CP
RDR-623 - Low Standby Current, Non-Isolated Flyback Power Supply Using LinkSwitch-TN2
Product LinkSwitch-TN2
DER-631 - 30 W Power Supply with >91% Average Efficiency
Product InnoSwitch3-CP
DER-574 - 1.65 W Non-Isolated Tapped Buck Power Supply
Product LinkSwitch-TN2
DER-508 - 4.75 W Dual Output Power Supply
Product LinkSwitch-TN2
RDR-506 - 1.44 W Non-Isolated Buck Converter using LinkSwitch-TN2
Product LinkSwitch-TN2

Related Products

Related Products
Product
Data Sheet
Topology
Power Level
Description
Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 100 W
Description

Off-Line Zero Voltage Switching (ZVS) Flyback Switcher IC with Up to Three CV Outputs or One CV & One CC Output for a Dimmable LED String

Topology Non-Isolated Flyback
Power Level 15 W
Description

High-Efficiency Off-line CV Flyback Switcher IC with Integrated 725 V / 900 V Primary MOSFET, Low No-Load, and Synchronous Rectification

Topology Secondary Side - Opto Regulated, Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 18 W
Description

Energy Efficient Off-line Switcher IC with Best-in-Class Light Load Efficiency and Lossless AC Zero-Cross Detection

Topology Secondary Side - Opto Regulated
Power Level N/A
Description

Energy-Efficient Off-Line Switcher with Enhanced Flexibility and Extended Power Range

Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 100 W
Description

Off-Line CV/CC QR Flyback Switcher IC with Integrated Primary-Side Switch, Synchronous Rectification, FluxLink Feedback and Constant Power Profile

Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 65 W
Description

Off-Line CV/CC QR Flyback Switcher IC with Integrated 650 V MOSFET, Synchronous Rectification & FluxLink Feedback for Applications up to 65 W

Topology Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 360 mA
Description

Highly Energy Efficient Off-line Switcher IC with Integrated 725 V / 900 V MOSFET and System Level Protection for Low Component-Count Power Supplies

Topology Secondary Side - Opto Regulated
Power Level N/A
Description

Energy-Efficient, Off-Line Switcher with Line-Compensated Overload Power

Topology Primary Side Regulated
Power Level 3.5 W
Description

Lowest Component Count Switcher for Linear Transformer Charger Replacement

Additional Documents